Hello every one I live in Norway and a proud owner of one Cagiva Elefant ,have been looking for an update on the electronics side ,all attempts to adjust the old system have failed miserably  .This system looks promising and i intend to play around with it for the next few weeks and get it working correctly, any how if not i have the old system in reserve .Now for the big question after setting the tps on the initial start up is the bike ridable after that or do i have to do a lot of work in order for it to run smoothly .The bike will be using an open loop system .

Did Cliff supply you with a map for that particular model? If not, you may have a little tweaking to do. Try riding it but be careful if you have signs of lean mixture.

As a fellow Duc owner I`d  say you have some work to do. The Guzzi map supplied will work & make it run but a bit from perfect.
I can supply a map from my 907IE or a map fr a Elephant owner in Switzerland.
Pm f maps and will help you w anything i can answer to! :)

Thanks for the information ,i did receive the printed copy of the map i guess it is for the ducati or something close i understood that the original software was used on a lot of bikes i am at a bit of a loss  as  to weather i should enter these values in to the program manually before i start the bike , the bike is running on the old system at the moment i was kinda hoping i could set up the new system in advance and do a swap then adjust it on a rolling road later , as for the offer of a software program that has been tried and tested on a ducati , Yes Please .