CAJ Innovations Forums

CAJ Innovations Forums
https://www.cajinnovations.com.au/forum/YaBB.pl MyECU >> Developments and wishs lists >> Tacho and Air Pressure Adjustment Via Map https://www.cajinnovations.com.au/forum/YaBB.pl?num=1248667877 Message started by Frosty on 07/27/09 at 14:11:17

Title: Tacho and Air Pressure Adjustment Via Map
Post by Frosty on 07/27/09 at 14:11:17

Hi Cliff,

Just throwing my ten cents worth in here, the last two map features that would allow the final tuning of the map would be the ability to get the tacho synchronisation right across the different bikes and to set a custom air pressure adjustment curve in the same way you can for air and oil pressure.

Best regards, Mark

Title: Re: Tacho and Air Pressure Adjustment Via Map
Post by _Cliff_ on 08/05/09 at 17:48:38

I started moving the tacho calibration table to where it could be configured only to later realise that the table is only used for displaying the throttle. The pulses for RPM are directly related to engine pulses.

What sort of errors are you seeing? Is it a linear error?