CAJ Innovations Forums

CAJ Innovations Forums
https://www.cajinnovations.com.au/forum/YaBB.pl MyECU >> MyECU Advanced usage >> WOT breakpoint https://www.cajinnovations.com.au/forum/YaBB.pl?num=1275245998 Message started by raz on 05/31/10 at 04:59:58

Title: WOT breakpoint
Post by raz on 05/31/10 at 04:59:58

Cliff,

If the ECU reads a TPS value that is about 20 units higher than the top row breakpoint, will Autotune consider us being at the breakpoint or not?

It will just use the coordinate 14.0, so considering it spot on, right?

Title: Re: WOT breakpoint
Post by YaBB Administrator on 05/31/10 at 06:51:01

There's not enough info to tell as the gap size comes into play also.
The best option is to adjust the top breakpoint to match what the throttle gives.

Title: Re: WOT breakpoint
Post by raz on 05/31/10 at 07:01:30

But there is no gap, there are no more rows.

Title: Re: WOT breakpoint
Post by YaBB Administrator on 05/31/10 at 07:04:36

You move the top throttle break with the THR line in the map or the ECUController in global map adjust.