CAJ Innovations Forums | |
https://www.cajinnovations.com.au/forum/YaBB.pl
General Category >> General Board >> 1994 Cali Digiplex wiring https://www.cajinnovations.com.au/forum/YaBB.pl?num=1288430173 Message started by Kiwi Roy on 10/30/10 at 19:16:13 |
Title: 1994 Cali Digiplex wiring Post by Kiwi Roy on 10/30/10 at 19:16:13
Over on the Wildguzzi.com forum we are trying to figure out the Digiplex wiring around the ECU of a 1994 California.
It has a mysterious 3 pin item 10. can anyone shed some light. Carl Allison would also like some info to update his drawing. The topic is coil replacement http://wildguzzi.com/forum/index.php?topic=40932.msg613793;topicseen#msg613793 Thanks :-* Roy |
Title: Re: 1994 Cali Digiplex wiring Post by raz on 10/30/10 at 20:51:19
Is that not the coil driver already mentioned in the thread?
|
Title: Re: 1994 Cali Digiplex wiring Post by Carl Allison on 10/20/12 at 10:58:08 I haven't got a clue as to what "L" means for a color code in italian (pin 1) so I colored it purple. I did this drawing directly from the Digiplex diagram and I'm pretty certain that everyone on this site is fully aware that the electrode tip on a spark plug is not connected to ground. That's the way it was shown though. Maybe that's why there are so many Digiplex failures 8-) |
Title: Re: 1994 Cali Digiplex wiring Post by Luhbo on 10/20/12 at 17:54:22 Carl Allison wrote on 10/20/12 at 10:58:08:
Haven't seen that particular picture so far, too, but where else do the sparks go as to ground? More remarkable, for me, is the fact, that you show two independent double coils, not the usually used wasted spark versions. Hubert |
Title: Re: 1994 Cali Digiplex wiring Post by Carl Allison on 10/21/12 at 01:12:49
It's Digiplex's drawing, all I did was convert it to color. They show dual lead coils so it's probably a generic sort of diagram and not specific to Moto Guzzi's.
|
CAJ Innovations Forums » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |