CAJ Innovations Forums

CAJ Innovations Forums
https://www.cajinnovations.com.au/forum/YaBB.pl MyECU >> Getting started with MyECU >> Prime figures-MM starting parameter https://www.cajinnovations.com.au/forum/YaBB.pl?num=1294573205 Message started by greenmonster on 01/09/11 at 21:40:05

Title: Prime figures-MM starting parameter
Post by greenmonster on 01/09/11 at 21:40:05

Cliff:

How did you come up with figures in the Prime table,
f e 12ms at 20C ( example fr Sport11iStock map I got w my software)?
Are they based on parameters i MM, own testing or what?

Do you know the Starting Parameters in MM P8 & 1.6,
could you tell us how they work if so?

Just courious, starting seems intriguing....

Title: Re: Prime figures-MM starting parameter
Post by _Cliff_ on 01/10/11 at 06:39:08

I wouldn't put too much value into how those figures came about. Just an evolution that gives reasonable starting on my bike.

Each of my 3 bikes has different starting characteristics and the Sport has been the most difficult starter but has recently improved.

The reason for this improvement is that I put a lithium battery pack in it.

I've not looked at an OEM ECU for a while but I should take another look.