CAJ Innovations Forums

CAJ Innovations Forums
https://www.cajinnovations.com.au/forum/YaBB.pl MyECU >> Getting started with MyECU >> Optimiser with myp8 and my15m https://www.cajinnovations.com.au/forum/YaBB.pl?num=1300125252 Message started by Ducst4 on 03/15/11 at 03:54:12

Title: Optimiser with myp8 and my15m
Post by Ducst4 on 03/15/11 at 03:54:12

Hello, I wanted to know why the optimizer works on my myp8 and does not work on myp15. We need two different optimizer?
Thanks

Title: Re: Optimiser with myp8 and my15m
Post by YaBB Administrator on 03/15/11 at 05:54:32

It should work on both so long as you have similar versions of firmware on each ECU.

Title: Re: Optimiser with myp8 and my15m
Post by YaBB Administrator on 03/15/11 at 06:10:29

Your MyP8 is from 2006 and your 16M is from 2009 so there's definitely a firmware incompatibility.

The easiest thing to do would be to bring all your units up to the latest version.

Title: Re: Optimiser with myp8 and my15m
Post by Ducst4 on 03/15/11 at 06:14:26

On myp8 everything works properly.
My15m, lights on all regularly, but do not read it tps and sensors.

Title: Re: Optimiser with myp8 and my15m
Post by Ducst4 on 03/15/11 at 06:16:28

Ok, and how do I do?

Title: Re: Optimiser with myp8 and my15m
Post by YaBB Administrator on 03/15/11 at 06:23:10

This is from my main site

http://www.cajinnovations.com/MyECU/FirmwareUpgrading.htm

and it's been discussed recently here -
http://cajinnovations.com/yabb0/YaBB.pl?num=1295349256
I think there's another thread somewhere here also.