CAJ Innovations Forums | |
https://www.cajinnovations.com.au/forum/YaBB.pl
MyECU >> MyECU Advanced usage >> TPS breaks https://www.cajinnovations.com.au/forum/YaBB.pl?num=1302273696 Message started by greenmonster on 04/09/11 at 00:41:36 |
Title: TPS breaks Post by greenmonster on 04/09/11 at 00:41:36
Took the time to measure mV, MyECU figures via Optimiser & actual degrees w a pretty accurate big wheel.
Did the baseline 150 mV setting, showed as 29 on Opt so I think baseline is accurate, raz got similar (33 IIRC)in his supplied map. 1. On the Sport11iStock map I got w my EcuController the first 5 breaks are 0 - 64 - 128 - 192 - 256 & Idle TPS is 66 which gives 64-192-258-312 actual breaks in the map. Have I got that right? 2. According to my measures that responds to (roughly) 2,0 - 4,9 - 7,9 - 11,0 -13,5 (last one estimated) degrees. Seems like quite steep first 5 breaks. Have I missed something in my measurements? How are the breaks in the SportV11ieStock map calculated? |
Title: Re: TPS breaks Post by YaBB Administrator on 04/09/11 at 06:48:55
As you can see the breaks are nice binary offsets 64, 128 etc.
Maybe we need a 32 up front. |
Title: Re: TPS breaks Post by greenmonster on 04/09/11 at 23:39:19
Seems like pretty low resolution up to 10 degrees,
only 3 breaks compared to the usual 7 on most maps I`ve seen. Think I`ll try something else. |
CAJ Innovations Forums » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |