Hi!

I am new to the myecu world. I have a Ducati 748 with a 853 kit. The My16m mk7 have been tested and works good.
I have read the WM16m map but the throttle breaks is written in degree´s. Does somebody know how to calculate the WM degree´s to Myecu throttle breaks.
I want to make the spark map as good as possible to save some time on the dyno.

I have this information.

degrees  voltage     digital
1.12      0.26         53
1.48      0.30         61
2.52      0.41         84
3.22      0.48         98
4.23      0.59         120
5.54      0.73         150
7.05      0.89         182
9.07      1.10         225
12.10     1.42         290
16.14     1.84         376
21.18     2.37         485
28.25     3.12         638
27.33     3.53         722
48.43     3.84         786
60.55     4.17         854
78.11     4.66         954
             5.00         1024

I use these on my map:

THR         915   846   770   704   640   548   395   290   200   135    90    60    35    10     0

Add 90 for the TPS baseline.

For the TPS  I use a value a bit higher to accommodate the fluctuation in voltage of the baseline. Normally sits at 85.

Remember if you copy the maps exactly, some of the behaviour of the original ecu will be translated to the myecu so to get the best you should test anyway. :D

Thank you. Great info!