CAJ Innovations Forums
https://www.cajinnovations.com.au/forum/YaBB.pl
MyECU >> Maps >> 97DaytonaRS Map
https://www.cajinnovations.com.au/forum/YaBB.pl?num=1467361813
Message started by JamesW on 07/01/16 at 18:30:13

Title: 97DaytonaRS Map
Post by JamesW on 07/01/16 at 18:30:13
I have about 3000k on the Daytona since installing MyECU.
Start/idle has taken the most work, the original ecu with a UltiMapUM431 started brilliantly!
It's 7 degrees Celsius at the moment, the bike wound a couple of revolutions then fired and idled.  I do apply the fast idle lever a couple of moments after it has started to idle so it dose not die.  Will keep adjusting the start to see if I can get it to start like the UltiMap.  Running on the UltiMap was horrid though!

Cheers,
James W
https://www.cajinnovations.com.au/forum/YaBB.pl?action=downloadfile;file=JimDaytonaRS_ecu.ecu (11 KB | 424 )

Title: Re: 97DaytonaRS Map
Post by YaBB Administrator on 07/02/16 at 07:38:20
Your 500RPM column looks a little lean. I've found that bumping these improves the starting, especially if it starts and stops
Try bumping the lowest 4 in that column up 10% .ie (0,0)3616 -> 4000. If that improves it you might try another 10%.

Make sure you go up that column enough to cover the fast idle input.

Title: Re: 97DaytonaRS Map
Post by JamesW on 07/02/16 at 12:57:35
10% and still a little slow to fire, 15% to the first column and Bang ;D.  Thanks Cliff!

CAJ Innovations Forums » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.