05/10/25 at 16:48:16
  
  Welcome, Guest. Please Login or Register
 MyECU main site
  Welcome to our forum.
 
  HomeHelpSearchLoginRegister  
 
  CAJ Innovations Forums › MyECU › Getting started with MyECU › Back Cover
(Moderators: _Cliff_, YaBB Administrator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1
Send Topic Print
Back Cover (Read 2247 times)
Quattroporte
YaBB Newbies
*
Offline


I love MyECU!

Posts: 39
Back Cover
04/01/10 at 11:45:20  
Just an observation I noticed... I was testing with the back cover off until the map was pretty good. then after sealing the unit, I noticed the bike running slightly differently.. I believe the ambient temp or barometric sensor was affected which threw the map off just a slight amount.... So, I guess, we need to make the final tweaks with the back cover on!  Regards
Charles my15m v11s04
Back to top
 
 
IP Logged
 
YaBB Administrator
YaBB Administrator
*****
Offline


I love YaBB!

Posts: 679
The Land of YaBB
Re: Back Cover
Reply #1 - 04/01/10 at 11:58:55  
What I have noticed with the My15M ( I also ride with the cover off ), is that the pressure reading is changed, sometimes by significant amounts. This has been position dependent so I've put it down to RF interference. Maybe a mobile tower.

Closing it up may shield the ECU better. Other than that I couldn't see what else it could be.
Back to top
 
The Administrator.
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
‹ Previous Topic | Next Topic ›
  « Home ‹ Board Top of this page

CAJ Innovations Forums » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge