I've tried to measure the voltage from the wires on the tps and I haven't had much luck in getting a good reading.  The tps value displayed on the ecu control page basically the same thing right?  I think it's about 55-60 fully closed and with the bleed screws open a bit more than 1/2, I have to bump up the left throttle screw to a reading of 95 to get the bike to idle at 1100. Does that sound about right?  I recall a table somewhere on the tps value/cooresponding voltage.... but can't find it. 

Does any one have a 03 or later v11 sport map my15m to share? Other than aftermarket cans that are straight through and I believe a k&n filter... all else is stock   Thanks


Regards,

Charles