CAJ Innovations Forums - ECU connectors

07/30/25 at 14:04:33

	Welcome, Guest. Please Login or Register
	Welcome to our forum.

Home

Help

CAJ Innovations Forums › MyECU › MyECU Advanced usage › ECU connectors

(Moderators: _Cliff_, YaBB Administrator)

‹ Previous Topic | Next Topic ›

Pages: 1

ECU connectors (Read 5721 times)

emry

YaBB Newbies

Offline

I love MyECU!

Posts: 6

ECU connectors
06/07/10 at 21:21:18

Thought this may be of intrest, if not already known.

http://www.tycoelectronics.com/catalog/bin/TE.Connect?C=20018&M=FEAT&P=&U=&BML=1...

I also stumbled across this @ starvmax.com fourms.

www.mouser.com

34-Pin Super Seal Connector
PN: 4-1437290-0

26-Pin Super Seal Connector
PN: 3-1437290-7

Different Size Pins for Super Seal Connector
PN: 3-1447221-4
PN: 3-1447221-3

Two different crimping tools for Different Size Pins for Super Seal Connector
PN: 1454509-2
PN: 1454509-1

IP Logged

greenmonster Full Member Offline Sweden Posts: 196	Re: ECU connectors Reply #1 - 06/08/10 at 09:04:46 Thx f sharing! How is you`re MyECU tweaking going?
Back to top	Ducati 907IE MyECU P8 IP Logged

emry YaBB Newbies Offline I love MyECU! Posts: 6	Re: ECU connectors Reply #2 - 06/08/10 at 11:55:35 Very slow. I live across the street from work. My commute consists of a 300ft. walk, so my riding time has been less desired.
Back to top	IP Logged

Kiwi Roy Junior Member Offline I love MyECU! Posts: 66	Re: ECU connectors Reply #3 - 06/30/10 at 08:43:41 Emry, I have been trying for days to figure out which part No they use. The ones listed there are different from the Tyco brochure. I havent managed to figure out what the Key ID is about either. Roy
Back to top	IP Logged

emry

YaBB Newbies

Offline

I love MyECU!

Posts: 6

Re: ECU connectors
Reply #4 - 07/01/10 at 13:10:34

I am out of town, I will nail down the exact part number when I get back next week. The "keys" are how the connectors are paired. Key 1 male will only fit Key 1 female and so on. Some ECU's uses multiple connectors with the same pin #'s, keys make sure that they are not accidentally plugged into the incorrect slot.

Of note, I have ordered a free sample direct from Tyco. It showed up several days later. Quick easy way to get a connector for the ECU builders, maybe.

Cliff, if you want to move this to the build forum, be my guest, else I will post there once I nail down the exact pt#. I

IP Logged

emry YaBB Newbies Offline I love MyECU! Posts: 6	Re: ECU connectors Reply #5 - 07/07/10 at 07:00:18 This is the correct connector for the 1.5M ECU http://www.tycoelectronics.com/catalog/pn/en/6437288-6?RQPN=6437288-6 You can request a sample from their site if you are nice.
Back to top	« Last Edit: 07/07/10 at 07:02:23 by emry » IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page