CAJ Innovations Forums - Help ! WM15 Baro Sensor Placement

05/11/25 at 22:06:36

	Welcome, Guest. Please Login or Register
	Welcome to our forum.

Home

Help

CAJ Innovations Forums › MyECU › MyECU Kit Construction › Help ! WM15 Baro Sensor Placement - 04 v11s guzzi

(Moderators: YaBB Administrator, _Cliff_)

‹ Previous Topic | Next Topic ›

Pages: 1

Help ! WM15 Baro Sensor Placement - 04 v11s guzzi (Read 6062 times)

Quattroporte

YaBB Newbies

Offline

I love MyECU!

Posts: 39

Help ! WM15 Baro Sensor Placement - 04 v11s guzzi
12/15/10 at 13:26:22

Howdy folks. I am trying to remember where pin # 1 of the baro sensor goes on the original ecu. because i removed the original sensor and connector for my15m programable, I wanted to have my original as a backup so I sourced the 2 parts.
Does pin #1 of the sensor go towards the edge of the PCB or towards the Center? Thanks for your help
Charles

IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: Help ! WM15 Baro Sensor Placement - 04 v11s guzzi Reply #1 - 12/15/10 at 20:17:39 Haven't got my email happening at the moment for sending ( on the road ). On the picture you sent me, pin 1 is at the lower left. The corner has a flat there to mark it.
Back to top	The Administrator. IP Logged

Quattroporte YaBB Newbies Offline I love MyECU! Posts: 39	Re: Help ! WM15 Baro Sensor Placement - 04 v11s guzzi Reply #2 - 12/16/10 at 04:39:25 So your saying that pin # 1 points is closer to the edge of the pcb than center
Back to top	IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: Help ! WM15 Baro Sensor Placement - 04 v11s guzzi Reply #3 - 12/16/10 at 12:25:42 Your email referenced the OEM ECU so that question doesn't make sense. If you are talking about MyECU then yes towards the side of the PCB.
Back to top	The Administrator. IP Logged

Quattroporte YaBB Newbies Offline I love MyECU! Posts: 39	Re: Help ! WM15 Baro Sensor Placement - 04 v11s guzzi Reply #4 - 12/16/10 at 14:00:13 I was referring to the original marelli ecu.
Back to top	IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: Help ! WM15 Baro Sensor Placement - 04 v11s guzzi Reply #5 - 12/17/10 at 06:33:51 Then as per the picture. I think I my have been incorrect below. I think I should have said the lower right. I must be getting dyslexic or something.
Back to top	The Administrator. IP Logged

Quattroporte YaBB Newbies Offline I love MyECU! Posts: 39	Re: Help ! WM15 Baro Sensor Placement - 04 v11s guzzi Reply #6 - 12/19/10 at 05:41:34 ok, lower right which is towards the edge of the pcb.. ok Thanks
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page