CAJ Innovations Forums - Assistance req'd -1100 Sporti loom

05/10/25 at 16:21:32

	Welcome, Guest. Please Login or Register
	Welcome to our forum.

Home

Help

CAJ Innovations Forums › General Category › General Board › Assistance req'd -1100 Sporti loom

(Moderator: YaBB Administrator)

‹ Previous Topic | Next Topic ›

Pages: 1 2

Assistance req'd -1100 Sporti loom (Read 18452 times)

Mad Farquhar

Full Member

Offline

Slainthe mhath

Posts: 171
Black Isle, Scotland
Gender: male

Re: Assistance req'd -1100 Sporti loom
Reply #15 - 05/22/12 at 23:17:40

OK - fresh day and a re-look. The errant ring terminal has 2 reds crimped onto it underneath the overlay. It can only reach stuff within about 300mm radius. I relooked at the diagram above and another in the techie manual which led me to check out the starter - once again (fixation time!).
Here is a pic of my starter solenoid and the wires - presently going to it. I taped them all together so have bit of confidence they are correct. They correspond to Carl Allisons colour code diag also however - are there enough of them?

MG Sport 1100 inj
Triking
Honda ST1100
V7 Stone

IP Logged

Mad Farquhar

Full Member

Offline

Slainthe mhath

Posts: 171
Black Isle, Scotland
Gender: male

Re: Assistance req'd -1100 Sporti loom
Reply #16 - 06/01/12 at 02:59:45

Bingo - it goes to the starter solenoid - so.... which one of the ones I have mounted on the starter solenoid should go elsewhere! It might be the black one which then goes over the other side to mate with the one on the gearbox hanger - this would tie in with the two in Razs pic. Jeez - nothing's simple in Luigis layout but maybe, just maybe slightly, very slightly quasi-intuitive.

MG Sport 1100 inj
Triking
Honda ST1100
V7 Stone

IP Logged

Carl Allison YaBB Newbies Offline I love MyECU! Posts: 18	Re: Assistance req'd -1100 Sporti loom Reply #17 - 10/20/12 at 10:51:07 I'm not dead certain everything is correct on this but it may help.
Back to top	IP Logged

Mad Farquhar Full Member Offline Slainthe mhath Posts: 171 Black Isle, Scotland Gender:	Re: Assistance req'd -1100 Sporti loom Reply #18 - 10/20/12 at 16:44:46 Carl - you are a star!
Back to top	MG Sport 1100 inj Triking Honda ST1100 V7 Stone IP Logged

Carl Allison YaBB Newbies Offline I love MyECU! Posts: 18	Re: Assistance req'd -1100 Sporti loom Reply #19 - 10/21/12 at 01:15:15 Let's see if that star still shines if there are errors on that diagram, I'm fairly certain some of the plugs for FI in the middle are messed up. I'm getting ready to hash around in the wiring on my Sporti in a couple of weeks so at least I'll finally be able to sort it out.
Back to top	IP Logged

Mad Farquhar Full Member Offline Slainthe mhath Posts: 171 Black Isle, Scotland Gender:	Re: Assistance req'd -1100 Sporti loom Reply #20 - 10/21/12 at 20:25:27 Had a quick look at the schematic last night w.r.t. relays - I got a bit confused withthe numbering around the fuses and relays - or are there mistrakes in that area? Looks useful though for eedjits like me.
Back to top	MG Sport 1100 inj Triking Honda ST1100 V7 Stone IP Logged

Roy Matson

YaBB Newbies

Offline

I love MyECU!

Posts: 11

Re: Assistance req'd -1100 Sporti loom
Reply #21 - 09/22/16 at 11:10:07

http://www.thisoldtractor.com/guzzi007/schematics/1996_California_1100i.gif

Is this any help?
With the battery disconnected see if there's any continuity between the lug and the frame, ECU case. battery positive
You can safely ground the wire through a tail lamp bulb to see if it activates anything. It's not the neutral light is it?

IP Logged

Pages: 1 2

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page