CAJ Innovations Forums - Add a Oil Pressure Sensor Input

12/16/25 at 05:07:06

	Welcome, Guest. Please Login or Register
	Welcome to our forum.

Home

Help

CAJ Innovations Forums › MyECU › Developments and wishs lists › Add a Oil Pressure Sensor Input

‹ Previous Topic | Next Topic ›

Pages: 1

Add a Oil Pressure Sensor Input (Read 2940 times)

Julien

YaBB Newbies

Offline

I love MyECU!

Posts: 2
Paris, France
Gender: male

Add a Oil Pressure Sensor Input
06/04/13 at 21:30:42

Hi MyECUers !

I'm a new MyECU16M owner (MK7).

I have a suggestion for the team to improve MyECU :

Adding an input for oil pressure Sensor (an after market one) could help the Guzzi owner by cut off the engine if the oil pressure is under 0,5 bar for example during more than a defined time.
Guzzi (Daytona, Centauro and V11) suffers of a very fragile oil pump that can break and kill the engine by lack of lubricant if we didn't see the oil pressure led fast enought. Cry

This feature exist for the equivalent of MyECU for cars by monitoring turbo and engine oil pressure.

MyECU16M MK7 on a Moto Guzzi V10 Centauro 1999

IP Logged

Bobd

Full Member

Offline

I am slowly developing
a relationship with MyEcu.

Posts: 150
Southampton
Gender: male

Re: Add a Oil Pressure Sensor Input
Reply #1 - 09/12/13 at 01:14:03

If you just want to stop the engine when the oil pressure fails it may be simpler to add a relay to cut out the ecu . You will need a second pressure switch set to a lower pressure or starting will be delayed until the motor has cranked up the oil. Hard acceleration can put on the standard light for a few seconds also. Perhaps a large capacitor inline with relay coil could help to damp out spurious triggering.

Any ideas Kiwi_Roy

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page