CAJ Innovations Forums - Correcting a past error

05/10/25 at 11:06:05

	Welcome, Guest. Please Login or Register
	Welcome to our forum.

Home

Help

CAJ Innovations Forums › MyECU › Maps › Correcting a past error - Missing pulses

(Moderator: _Cliff_)

‹ Previous Topic | Next Topic ›

Pages: 1

Correcting a past error - Missing pulses (Read 1340 times)

YaBB Administrator

Offline

I love YaBB!

Posts: 679
The Land of YaBB

Correcting a past error - Missing pulses
03/08/22 at 17:27:00

Those with a My16M or My15M will have the following configuration in their map.

# TDC is the pulse count for TDC power stroke of cylinder 1 ( i.e. When the spark fires
# CylOffs is the number of degrees between success cylinders ( 0-720)
# PulsesPer is the number of pulses for the 720 degree 4 stroke cycle

MyECU Cfg TDC=0x1600, CylOffs=270, PulsesPer=48, MissingPulses=3

The value of 3 for missing pulses was due to some early confusion on my part (2 missing teeth gives a gap period 3 times greater). The correct value should be 2.
This error has not caused any issues, being cosmetic and embarrassing only but should be corrected to avoid issues with future versions of the firmware.

« Last Edit: 03/10/22 at 06:06:28 by YaBB Administrator »

The Administrator.

IP Logged

sign216 Full Member Offline Posts: 176	Re: Correcting a past error Reply #1 - 03/09/22 at 10:20:56 Admin, Thanks for the update. So the old value doesn't adversely affect performance, but the new value is more correct. Is that the best way to put it? Joe
Back to top	IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: Correcting a past error Reply #2 - 03/09/22 at 11:55:19 Well not more correct, just correct. The old value was wrong but had no effect on operation at all.
Back to top	The Administrator. IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page