Welcome, Guest. Please Login or Register
MyECU main site
  Welcome to our forum.
  HomeHelpSearchLoginRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
Tacho and Air Pressure Adjustment Via Map (Read 2310 times)
Frosty
YaBB Newbies
*
Offline


I love MyECU!

Posts: 2
Tacho and Air Pressure Adjustment Via Map
07/27/09 at 14:11:17
 
Hi Cliff,

Just throwing my ten cents worth in here, the last two map features that would allow the final tuning of the map would be the ability to get the tacho synchronisation right across the different bikes and to set a custom air pressure adjustment curve in the same way you can for air and oil pressure.

Best regards,  Mark
Back to top
 
 
IP Logged
 
_Cliff_
Full Member
***
Offline


I Love YaBB 2!

Posts: 126
Re: Tacho and Air Pressure Adjustment Via Map
Reply #1 - 08/05/09 at 17:48:38
 
I started moving the tacho calibration table to where it could be configured only to later realise that the table is only used for displaying the throttle. The pulses for RPM are directly related to engine pulses.

What sort of errors are you seeing? Is it a linear error?
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print