CAJ Innovations Forums - Prime figures-MM starting parameter

05/10/25 at 15:40:18

	Welcome, Guest. Please Login or Register
	Welcome to our forum.

Home

Help

CAJ Innovations Forums › MyECU › Getting started with MyECU › Prime figures-MM starting parameter

(Moderators: _Cliff_, YaBB Administrator)

‹ Previous Topic | Next Topic ›

Pages: 1

Prime figures-MM starting parameter (Read 2266 times)

greenmonster Full Member Offline Sweden Posts: 196	Prime figures-MM starting parameter 01/09/11 at 21:40:05 Cliff: How did you come up with figures in the Prime table, f e 12ms at 20C ( example fr Sport11iStock map I got w my software)? Are they based on parameters i MM, own testing or what? Do you know the Starting Parameters in MM P8 & 1.6, could you tell us how they work if so? Just courious, starting seems intriguing....
Back to top	Ducati 907IE MyECU P8 IP Logged

_Cliff_

YaBB Moderator

Offline

I Love YaBB 2!

Posts: 126

Re: Prime figures-MM starting parameter
Reply #1 - 01/10/11 at 06:39:08

I wouldn't put too much value into how those figures came about. Just an evolution that gives reasonable starting on my bike.

Each of my 3 bikes has different starting characteristics and the Sport has been the most difficult starter but has recently improved.

The reason for this improvement is that I put a lithium battery pack in it.

I've not looked at an OEM ECU for a while but I should take another look.

IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page