CAJ Innovations Forums

05/10/25 at 20:25:44

	Welcome, Guest. Please Login or Register
	Welcome to our forum.

Home

Help

CAJ Innovations Forums › MyECU › MyECU Advanced usage › TPS breaks

(Moderators: _Cliff_, YaBB Administrator)

‹ Previous Topic | Next Topic ›

Pages: 1

TPS breaks (Read 5612 times)

greenmonster

Full Member

Offline

Sweden

Posts: 196

TPS breaks
04/09/11 at 00:41:36

Took the time to measure mV, MyECU figures via Optimiser & actual degrees w a pretty accurate big wheel.

Did the baseline 150 mV setting, showed as 29 on Opt so I think baseline is accurate, raz got similar (33 IIRC)in his supplied map.

1. On the Sport11iStock map I got w my EcuController
the first 5 breaks are 0 - 64 - 128 - 192 - 256 & Idle TPS is 66 which gives 64-192-258-312 actual breaks in the map.
Have I got that right?

2. According to my measures that responds to (roughly) 2,0 - 4,9 - 7,9 - 11,0 -13,5 (last one estimated) degrees.
Seems like quite steep first 5 breaks.
Have I missed something in my measurements?
How are the breaks in the SportV11ieStock map calculated?

« Last Edit: 04/09/11 at 00:44:57 by greenmonster »

Ducati 907IE MyECU P8

IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: TPS breaks Reply #1 - 04/09/11 at 06:48:55 As you can see the breaks are nice binary offsets 64, 128 etc. Maybe we need a 32 up front.
Back to top	The Administrator. IP Logged

greenmonster Full Member Offline Sweden Posts: 196	Re: TPS breaks Reply #2 - 04/09/11 at 23:39:19 Seems like pretty low resolution up to 10 degrees, only 3 breaks compared to the usual 7 on most maps I`ve seen. Think I`ll try something else.
Back to top	Ducati 907IE MyECU P8 IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page