CAJ Innovations Forums - LC1- What is the terminating plug

05/10/25 at 20:53:27

	Welcome, Guest. Please Login or Register
	Welcome to our forum.

Home

Help

CAJ Innovations Forums › MyECU › MyECU Advanced usage › LC1- What is the terminating plug

(Moderators: _Cliff_, YaBB Administrator)

‹ Previous Topic | Next Topic ›

Pages: 1

LC1- What is the terminating plug (Read 4304 times)

Bobd

Full Member

Offline

I am slowly developing
a relationship with MyEcu.

Posts: 150
Southampton
Gender: male

LC1- What is the terminating plug
07/02/12 at 07:26:55

Hi, hope I have not put this post in the wrong place.

I have just bought a used LC-1 including a DB AFR gauge. Everything, including instructions, seems to be there except for the 'terminating plug' which is described as a 3.5mm audio style plug "with no wires". I understand I need this to be fitted to the end of one of the leads when connecting the LC-1 to a computer. Is this a special plug that I will have to order from Innovate or something I can make up myself. Is it just a 3.5mm jack with no wires, or with a shorting link or perhaps a resistor?. It is not used to connect direct to the computer but is used to 'terminate ' the unused 'IN' serial line.
Anyone have any ideas.

IP Logged

raz Senior Member Offline Guzzi 11OO Sport, My16MkV, Innovate LC-1 Posts: 373 Stockholm, Sweden Gender:	Re: LC1- What is the terminating plug Reply #1 - 07/02/12 at 11:49:45 It is a 2.5 mm stereo one. The tip and center should be shorted together according to a post here: http://www.msextra.com/forums/viewtopic.php?f=94&t=27926
Back to top	59° North 1100 Sport iniezione elettronica -- the perfect merge of a superbike and a steam train IP Logged

Bobd Full Member Offline I am slowly developing a relationship with MyEcu. Posts: 150 Southampton Gender:	Re: LC1- What is the terminating plug Reply #2 - 07/02/12 at 14:37:04 Many thanks RAZ, of course you are are right - it is 2.5mm. I will make up the plug as suggested on that site. Thanks again.
Back to top	IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: LC1- What is the terminating plug Reply #3 - 07/02/12 at 14:41:00 I run the LC1 in its factory default mode. There's no real advantage to programming any custom curves in it.
Back to top	The Administrator. IP Logged

Bobd Full Member Offline I am slowly developing a relationship with MyEcu. Posts: 150 Southampton Gender:	Re: LC1- What is the terminating plug Reply #4 - 07/02/12 at 23:36:00 Thankyou for that tip. I will leave well alone.
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page