CAJ Innovations Forums - 97DaytonaRS Map

05/10/25 at 13:56:18

	Welcome, Guest. Please Login or Register
	Welcome to our forum.

Home

Help

CAJ Innovations Forums › MyECU › Maps › 97DaytonaRS Map

(Moderator: _Cliff_)

‹ Previous Topic | Next Topic ›

Pages: 1

97DaytonaRS Map (Read 3104 times)

JamesW

YaBB Newbies

Offline

I love MyECU!

Posts: 9

97DaytonaRS Map
07/01/16 at 18:30:13

I have about 3000k on the Daytona since installing MyECU.
Start/idle has taken the most work, the original ecu with a UltiMapUM431 started brilliantly!
It's 7 degrees Celsius at the moment, the bike wound a couple of revolutions then fired and idled. I do apply the fast idle lever a couple of moments after it has started to idle so it dose not die. Will keep adjusting the start to see if I can get it to start like the UltiMap. Running on the UltiMap was horrid though!

Cheers,
James W

JimDaytonaRS_ecu.ecu (11 KB | 424 )

1996 Moto Guzzi Daytona RS. Full Staintune system, K&N and MY16M ecu.

IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: 97DaytonaRS Map Reply #1 - 07/02/16 at 07:38:20 Your 500RPM column looks a little lean. I've found that bumping these improves the starting, especially if it starts and stops Try bumping the lowest 4 in that column up 10% .ie (0,0)3616 -> 4000. If that improves it you might try another 10%. Make sure you go up that column enough to cover the fast idle input.
Back to top	The Administrator. IP Logged

JamesW YaBB Newbies Offline I love MyECU! Posts: 9	Re: 97DaytonaRS Map Reply #2 - 07/02/16 at 12:57:35 10% and still a little slow to fire, 15% to the first column and Bang . Thanks Cliff!
Back to top	1996 Moto Guzzi Daytona RS. Full Staintune system, K&N and MY16M ecu. IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page